Clippercide Spray for Hair Clippers 5 in 1 Formula
-
Estimated Delivery: *Sep 22 - Sep 26
-
Free Shipping & Returns: On all orders over £50
PAIR IT WITH
Clippercide Spray for Hair Clippers 5-in-1 Formula is a product for easy application without spending much on other offers, offering all the benefits needed by Clippercide Spray. For metal hair clippers and accessories, this one-of-a-kind formula disinfects, lubricates, cleans, cools and prevents rust in less than 10 minutes. It is used by stylists and hairdressers.
Perfect for : professional use between clients, meeting state board disinfection requirements in a single easy step.
Problem → Solution : using three separate products for disinfecting, lubricating and cleaning clipper blades takes time between clients — this 5-in-1 formula is built to do all of that in a single spray, saving time without cutting corners on hygiene.
Key Features & Benefits
- Disinfects: In accordance with OSHA and state board rules. EPA-registered bactericide, fungicide and virucide. Known to kill HIV-1 and TB.
- Lubricates Blades: Clippercide makes a thin film of lubricant that decreases friction and holds blades sharp.
- Cleanses: Aerosol spray gives off hair, dirt and particles from between clipper teeth.
- Cools: Aerosol spray cools blades on contact.
- Prevents Rust: Anti-rust formula protects blades and prolongs clipper life.
Product Specification
| Field | Value |
|---|---|
| Product Type | 5-in-1 clipper disinfectant, lubricant and cleaning spray |
| Active Ingredients | Isopropanol, o-phenylphenol, isobutane, propane, isopropyl alcohol |
| Contact Time | Under 10 minutes |
| Suitable For | Metal hair clippers and accessories |
| Used By | Stylists and hairdressers |
How the Ingredients Work
- Isopropanol & Isopropyl Alcohol: Active disinfecting agents that help kill bacteria, fungi and viruses, including HIV-1 and TB, on contact.
- o-Phenylphenol: Included as part of the formula's broad-spectrum disinfecting action.
- Isobutane & Propane: Aerosol propellants that deliver the fine spray used to clean debris from clipper teeth and cool blades on contact.
How to Use and Care for Clippercide Spray
Prep: Clean any visible debris from clippers before using.
Apply: Spray Clippercide through the teeth of clipper blades, covering all surfaces, after each use.
Targeted Timing: Keep surfaces moist for 10 minutes.
Storage: Allow to air dry.
Safety note : Flammable aerosol. Causes serious eye irritation and skin irritation. Harmful if inhaled. Use in a well-ventilated area, away from open flame, and avoid contact with eyes and skin.
Who this is for
Barbers, stylists and hairdressers wanting a single, efficient product to disinfect, lubricate, clean, cool and protect metal clipper blades between clients.
Who this is NOT for
Not intended for use in poorly ventilated spaces or near open flame — it's a flammable aerosol, so standard aerosol safety precautions apply.
FAQ
Q1. How long does this take to disinfect clipper blades? Under 10 minutes, keeping surfaces moist for that duration before allowing them to air dry.
Q2. Is this safe to use between every client? Yes — it's designed to meet OSHA and state board disinfection requirements, making it suitable for use between clients.
Q3. What should I do if this gets in my eyes? It causes serious eye irritation — avoid contact with eyes and seek appropriate first aid if contact occurs.
Q4. Is this a flammable product? Yes — it's a flammable aerosol, so it should be used away from open flame and in a well-ventilated area.
Clippercide Spray for Hair Clippers 5-in-1 Formula is a product for easy application without spending much on other offers, offering all the benefits needed by Clippercide Spray. For metal hair clippers and accessories, this one-of-a-kind formula disinfects, lubricates, cleans, cools and prevents rust in less than 10 minutes. It is used by stylists and hairdressers.
Perfect for : professional use between clients, meeting state board disinfection requirements in a single easy step.
Problem → Solution : using three separate products for disinfecting, lubricating and cleaning clipper blades takes time between clients — this 5-in-1 formula is built to do all of that in a single spray, saving time without cutting corners on hygiene.
Key Features & Benefits
- Disinfects: In accordance with OSHA and state board rules. EPA-registered bactericide, fungicide and virucide. Known to kill HIV-1 and TB.
- Lubricates Blades: Clippercide makes a thin film of lubricant that decreases friction and holds blades sharp.
- Cleanses: Aerosol spray gives off hair, dirt and particles from between clipper teeth.
- Cools: Aerosol spray cools blades on contact.
- Prevents Rust: Anti-rust formula protects blades and prolongs clipper life.
Product Specification
| Field | Value |
|---|---|
| Product Type | 5-in-1 clipper disinfectant, lubricant and cleaning spray |
| Active Ingredients | Isopropanol, o-phenylphenol, isobutane, propane, isopropyl alcohol |
| Contact Time | Under 10 minutes |
| Suitable For | Metal hair clippers and accessories |
| Used By | Stylists and hairdressers |
How the Ingredients Work
- Isopropanol & Isopropyl Alcohol: Active disinfecting agents that help kill bacteria, fungi and viruses, including HIV-1 and TB, on contact.
- o-Phenylphenol: Included as part of the formula's broad-spectrum disinfecting action.
- Isobutane & Propane: Aerosol propellants that deliver the fine spray used to clean debris from clipper teeth and cool blades on contact.
How to Use and Care for Clippercide Spray
Prep: Clean any visible debris from clippers before using.
Apply: Spray Clippercide through the teeth of clipper blades, covering all surfaces, after each use.
Targeted Timing: Keep surfaces moist for 10 minutes.
Storage: Allow to air dry.
Safety note : Flammable aerosol. Causes serious eye irritation and skin irritation. Harmful if inhaled. Use in a well-ventilated area, away from open flame, and avoid contact with eyes and skin.
Who this is for
Barbers, stylists and hairdressers wanting a single, efficient product to disinfect, lubricate, clean, cool and protect metal clipper blades between clients.
Who this is NOT for
Not intended for use in poorly ventilated spaces or near open flame — it's a flammable aerosol, so standard aerosol safety precautions apply.
FAQ
Q1. How long does this take to disinfect clipper blades? Under 10 minutes, keeping surfaces moist for that duration before allowing them to air dry.
Q2. Is this safe to use between every client? Yes — it's designed to meet OSHA and state board disinfection requirements, making it suitable for use between clients.
Q3. What should I do if this gets in my eyes? It causes serious eye irritation — avoid contact with eyes and seek appropriate first aid if contact occurs.
Q4. Is this a flammable product? Yes — it's a flammable aerosol, so it should be used away from open flame and in a well-ventilated area.
